Dynamica HMPE Netting

Ultra-light, high-strength netting made with Dyneema® for drone recovery, area protection, and payload carrying.

Dynamica HMPE netting is made with Dyneema® delivering exceptional strength in an extremely compact, lightweight format. Up to a third of the weight of traditional nylon netting and with smaller twine diameters, our nets are easier to carry, faster to deploy, and more stable in use. We manufacture nets to order in any size with twine diameter between 0.5 to 16 mm.

Technical information

Construction

Single knot / double knot (specify on request)

Fibre

Generic HMPE / Dyneema®

Weight vs. nylon

Up to 66% lighter

Water absorption

None

Buoyancy

Neutrally buoyant

Colours available

Available in tactical colours

Size

Custom – any mesh size and net dimensions

Twine diameter

0,5 to 16 mm

Fatigue resistance

Very good

Abrasion resistance

High

UV resistance

Good

Chemical resistance

Excellent

Temperature range

–100°C to +70°C

Coating / impregnation

Various available, including NIR absorbing

Features

Strongest fibre in the world - extreme strength at minimal weight
Zero water absorption, weight and shape stay consistent in wet conditions
Neutrally buoyant, easy to recover from water
Very good fatigue resistance, withstands repeated loading cycles
High abrasion resistance
• Suited for arctic operations down to –100°C
Smaller twine diameters, reduced aerodynamic drag
Improved net stability in the air
Easy to carry and rapid to deploy
Chemical resistant
Available in tactical colours
Made to order between 0,5 mm and 16 mm
Many coatings available, including NIR absorbing
NIR absorbing coating available

Applications

Static drone recovery nets

A suspended recovery net allows UAVs to land safely without a runway - the drone flies into the net at low speed, which absorbs the impact and brings it to a controlled stop. This enables drone operations in confined spaces, on ships, or in forward operating locations where a prepared landing strip is not available.

The low weight and small pack size of Dyneema^® netting makes the entire recovery system easy to transport and rapid to set up. The net maintains its shape and weight in rain, snow or sea spray - critical for consistent recovery geometry - and holds up to repeated impact loads without degrading.

Overhead area protection

Nets suspended over trenches, open storage, vehicle parks, or personnel areas provide passive protection against FPV drones, loitering munitions, and dropped ordnance. The net either snags and deflects an incoming threat or disrupts the flight path enough to prevent a direct hit on the target below.

Dyneema^® netting covers large areas at a fraction of the weight of conventional netting - making it viable to protect broader zones with the same logistics footprint. The reduced twine diameter also means less wind loading, so large overhead spans are more stable in exposed locations.

Payload carrying under drones

Cargo nets slung beneath a drone allow equipment, supplies, or materials to be transported without a rigid container. Weight is the critical constraint for drone payloads, and a Dyneema^® net adds minimal mass of its own leaving maximum capacity for the cargo itself.

The small twine diameter reduces aerodynamic drag, which improves the stability of the suspended load during flight and lowers power consumption on the drone platform.

Why choose Dynamica netting?

Strength where it counts

HMPE (High Modulus Polyethylene) is the strongest synthetic fibre available by weight. Dyneema^® is the premium grade used throughout defence, offshore, and safety industries for applications where failure is not an option. Our netting delivers the same material performance in net form - proof that strength does not have to mean weight.

Weight is a tactical advantage

Netting made with Dyneema^® is up to a third of the weight of nylon netting at equivalent. For drone payload nets, that means more capacity for cargo. For recovery and protection nets, it means systems that can be carried, deployed, and repositioned by small teams without heavy equipment.

Reduced drag, better aerodynamic performance

Smaller twine diameters are a direct consequence of using a higher-strength fibre, you need less material to achieve the same load rating. For payload nets, this means less drag on the drone during flight. For overhead protection nets, it means lower wind loading across large spans, improving stability and reducing anchor forces.

Zero water absorption - consistent in any conditions

HMPE does not absorb water. When delpoyed in rain, snow, or at sea it does not gain weight and change shape, making recovery geometry predictable and minimiging payload penalty. A Dyneema^® net maintains the same weight and geometry wet as it does dry, ensuring consistent performance and predictable handling in any conditions. Combined with a working temperature range down to –100°C, this makes our netting particularly well suited even to arctic and maritime operations.

Neutrally buoyant - easy to recover

HMPE is neutrally buoyant in water. A net that enters the water floats on the surface. It stays accessible, making recovery fast and straightforward. For maritime and coastal drone operations, this is a practical advantage.

Built to last under repeated use

Dyneema^® netting has very good fatigue resistance, maintaining its strength and integrity through repeated loading and deployment cycles. Combined with high abrasion resistance, the net holds up in demanding field conditions against rough surfaces, edges, and the friction of regular use, without degrading at the rate of conventional netting materials.

NIR absorbing coating — engineered for optical performance

Our netting is available with an advanced NIR (near-infrared) absorbing coating applied directly to the yarn.

By integrating the coating technology directly into the yarn rather than applying it as a surface treatment after net construction, performance is consistent across the entire structure and holds up through repeated use and deployment.

Made to order

We do not hold stock nets. Every net is manufactured to your specification - mesh size, net dimensions, twine diameter, and colour. This means you get exactly what your application requires, not a compromise.

Ordering

Dynamica HMPE netting is available by request. To get a quote or start a specification, use the Solution Request form:

Solution Request